We managed to find a manufacturer of transparent plastic balls, which can also be disassembled and assembled. And this means the following: almost any of the polyhedra constructed from the “Magic Edges” sets can be placed inside a sphere.
First, it allows us to demonstrate how a sphere describes a polyhedron.
Secondly, it is a very aesthetic design that can be hung, protecting the polyhedron from dust. At the moment we have spheres with the following diameter:
D = 200 mm
D = 180 mm
D = 160 mm
D = 140 mm
D = 120 mm
We also have models of Platonic solids from the “Magic Edges №12”, which at first glance may seem of different sizes. But there is one relation that unites all these polytopes with their sizes. This is the diameter of the sphere in which you can put all five models. The dimensions of polyhedra in the 12th issue were chosen so that the sphere described around the polyhedron was exactly 110 mm. This can be especially pronounced when comparing the sizes of the icosahedron and the tetrahedron. And now, having a sphere in place that can be disassembled and assembled, we can successively place there all the Platonic solids, one after the other.
There is really one small "but". The manufacturer of these transparent “miracle balls” indicates the diameter of the sphere in outer diameter. And since the sphere has a certain wall thickness and anchoring thickness for the join-disconnect operation, the inner diameter will be slightly smaller.
Creating sets of Platonic and Archimedean bodies, we also adhered to the size of the diameter of the outer sphere.
Why all this? The situation is this. The set of “Magic Edges №12” (Platonic Solids) has the sizes of all five polyhedrons are selected in such a way that they can be inscribed in a sphere with a diameter of 110 mm. And here we are talking about a sphere that is ideally thin from a mathematical point of view. Or about a sphere with an inner diameter of 110 mm. Therefore, if you buy a set of spheres with an outer diameter of 110 mm (there are such ones on sale), then our five Platonic solids simply do not fit there. Why? They simply have an internal diameter of less than 110 mm.
Nevertheless, all our five Platonic solids perfectly fit into balls with an outer diameter of 120 mm. After you close the sphere, there remains a small gap of 4-5 mm, but this can already be attributed to some error.
So, we look - where some polyhedron fits. In a transparent sphere with an outer diameter of 200 mm, polyhedrons can be placed from the issues: 4, 6, 9, 11, 17, 22, and 26.
One can specify the following mathematical characteristics in each of the five Platonic solids: 1....